Google+
 

Nextron Products

           100% Made In The USA

Enjoy Fresher Air In Your Home
 

Frequently Asked Questions


We try to anticipate questions you might have about our products and provide the answers here. If you need additional information please email us at nextronproducts@gmail.com or call us at (301)-850-4424.

 REPLACEMENT FOR AIR PURIFICATION FILTERS

1.

What is cost difference between Nextron Products replacement filters and other filters?

You pay 40%-80% less than typical paper box purification filters!

With our Lifetime Reuseable Frame for unlimited use, this GREATLY REDUCES the cost of Re-order filter inserts, with some as low as $6 per filter!


2.

What is the effectiveness of Nextron Products Filters compared to others?

Nextron Filters purifies air of pollutants down to the molecule.  Even the MOST EXPENSIVE purifier filters costing $50-$100 CANNOT achieve this level of purification!  (MOLD, SMOKE, PET DANDER, ALLERGENS, BACTERIA, VOC, SMOG, OZONE, ODORS)


3.

What is the construction of Nextron Filters?

Three stage filtration filter: First Stage- Electrostatic charged pre-filter media; Second Stage- A high performance Absorbtion media; Third Stage- A high density electrostatic enhanced media.


4.

What is the maintainance of Nextron Products Filters?

Routine change of pre-filter media every 45-90 days with simple peel off and press on technology. No need to change main filter or frame. (Be sure to cut pre-filter in half before removing)


5.

How do I install a Nextron Filter in my purifier?

Be sure to install frame with the white pre-filter facing incoming air.  Please note that the X on the back of the frame faces the inside of the purifer.  The opposite side (with the filter attached) faces the air coming into the machine.  DO NOT put the purification filter on the X side of the frame (this will have a negative effect on air flow).  *Please see the Installation page on this website for more information.


*

PLEASE NOTE:

Our filter relies on electrostatic charged media, attracting particles to the media rather than just the small pore opening and absorption media holding smaller pollutants thru absorption.  Both media relies less on small pores, therefore requiring less media to achieve more, resulting in longer life, and better air flow over the life of the filter.


CARBON FILTER MEDIA FAQs


1.

Filter appears loose to frame, is this normal?

Yes this is normal. Once the purifier is turned on, the air flow draws filter onto frame for an air tight fit.


2.

Since the main filter is not pleated, will this require more frequent changes?

No, due to our SUPERIOR PRE-FILTER, it has the ability to collect 5-10 TIMES more particulates through electrostatic charged media versus typical pre-filters.  This superior performance GREATLY increases the useful life of our main carbon filter without the need for pleats.


*

FACT:

Our filters collect contaminates TO THE FIBERS and not by clogging pores with trapped particles.  This ability contributes to a BETTER AIR FLOW with less restriction by clogged pores.  

THIS PROCESS IMPROVES THE USEFUL LIFE OF THE MAIN CARBON FILTER.


Payment Options